Need a cable for your footswitch? Click here!
This pedal is designed to be used with the Roland AC-60 or AC-90 amp. It is the based on having two Boss FS-6 pedals to use the amp's footswitchable functions.
This pedal achieves it at a fraction of the cost as well as having a smaller footprint.
The front two switches are set at a lower height to the back switches in order for them not to get in the way of each other. You'll need a two stereo patch cable to connect the pedal to your amp.
The pedal is totally passive so no power required.
By default the pedal comes unpainted with a clear label, in the options above you can select for the pedal to be powder coat painted black for an additional £5.00. Please note that if you select for the pedal to be painted then it will not be labelled.
The pedal is built with:
- Aluminium enclosure
- Neutrik jack sockets
- DPDT heavy duty foot switches
- Point to point wiring
- Velcro to stick it to your pedalboard
2 years, please see Terms & Conditions for further information.