This is a portrait version of our popular Dual Momentary Footswitch which is wired similarly to the Boss FS-6 (or two FS-5Us), so you can use it to control additional features of your pedals such as the RC looper series. The rear footswitch is mounted at a higher height to the front switch.
If you check your Boss manual and it shows the polarity switch to the left (the most common setting for Boss pedals) then request the “Normally Closed” polarity option above when ordering. If the manual shows the switch to the right then please request the “Normally Open” polarity option above when ordering.
We can do the either polarity option using the standard footswitches that have a mechanical click or with soft touch footswitches so pick which you would prefer.
If you would like both polarity options then we can add a polarity switch to the side of the enclosure for an extra £5.00, this option is only available with the clicking footswitches.
Otherwise if you are still unsure then please contact me as the pedal may be incompatible if not wired correctly.
The pedal is totally passive, so no power required.
By default the pedal comes unpainted with a clear label, in the options above you can select for the pedal to have a powder coat painted finish for an additional £5.
Please note that if you select for the pedal to be painted then it will not be labelled.
If you need a cable for the footswitch then please add one to be included.
The pedal is built with:
- Aluminium enclosure
- Neutrik jack socket
- Heavy duty foot switches
- Point to point wiring
- Velcro to stick it to your pedalboard
2 years, please see Terms & Conditions for further information.