Need a cable for your footswitch? Click here!
This is a Dual Momentary Footswitch which is wired similarly to the Boss FS-6 (or two FS-5Us), so you can use it to control additional features of your pedals such as the RC looper series. See below for an example of the pedal being used with an RC-3.
If you check your Boss manual and it shows the polarity switch to the left (the most common setting for Boss pedals) then request the “Normally Closed” polarity option above when ordering. If the manual shows the switch to the right then please request the “Normally Open” polarity option above when ordering.
We can do the either polarity option using the standard footswitches that have a mechanical click or with soft touch footswitches so pick which you would prefer.
If you would like both polarity options then we can add a polarity switch for an extra £5.00, this option is only available with clicking footswitches.
Otherwise if you are still unsure then please contact me as the pedal may be incompatible if not wired correctly.
The pedal is totally passive so no power required. All that you need is a stereo patch cable to connect it to your pedal.
By default the pedal comes unpainted with a clear label, in the options above you can select for the pedal to be powder coat painted black for an additional £5.00. Please note that if you select for the pedal to be painted then it will not be labelled.
The pedal is built with:
- Aluminium enclosure
- Neutrik jack socket
- DPDT heavy duty foot switches
- Point to point wiring
- Velcro to stick it to your pedalboard
2 years, please see Terms & Conditions for further information.