Need a cable for your footswitch? Click here!
This pedal is a dual latching footswitch for switching channels/effects on an amp that takes a dual latching footswitch with a stereo 1/4" TRS cable, each footswitch has an internal slider switch to let you set the LED to the correct channel/effect.
The pedal is passive so will work without power, however the status LEDs are powered via a 2.1mm 9v DC socket.
Just add a stereo patch cable and you are ready to go, the left switch goes to Tip and the right switch to Ring.
By default the pedal comes unpainted with a clear label, in the options above you can select for the pedal to be powder coat painted black for an additional £5.00. Please note that if you select for the pedal to be painted then it will not be labelled.
The pedal is built with:
- Aluminium enclosure
- Neutrik jack socket
- 3PDT heavy duty foot switches
- Point to point wiring
- 2.1mm 9v DC Socket
- Velcro to stick it to your pedalboard
2 years, please see Terms & Conditions for further information.