Dual Latching Footswitch with LEDs
Need a cable for your footswitch? Click here!
This pedal is a dual latching footswitch for switching channels/effects on an amp that takes a dual latching footswitch with a stereo 1/4" TRS cable, each footswitch has an internal slider switch to let you set the LED to the correct channel/effect.
The LEDs are powered by an internal 9v battery (not included) or a 2.1mm 9v DC socket. Select the option you would prefer.
Just add a stereo patch cable and you are ready to go.
By default, the pedal comes unpainted with a black label, you can have the pedal painted for an additional £5-£7 and also have a coloured label for an additional £2.
Examples of our enclosures and labels can been seen here. Please note that if a enclosure colour is not listed then it is not available for this pedal.
The pedal is built with:
- Aluminium enclosure
- Neutrik jack socket
- DPDT heavy duty foot switches
- Point to point wiring
- Battery clip or 2.1mm 9v DC Socket
- Velcro to stick it to your pedalboard
2 years, please see Terms & Conditions for further information.
- VAT is only applied to UK sales
After a little bit of fiddling with the LED switches I’m absolutely delighted with the footswitch. I opted to go with a grey paint job with blue lettering and bordering. It looks very pro. The footswitch has made my beloved little Ampeg J12T’s reverb and tremolo so much more usable. There’s no remote footswitch or input as standard on these amps to control those functions so had a tech install a trs input into the the back of the amp to accomodate a remote footswitch. It was very cheap to do. Very clean build inside and well put together. Ordered with a trs cable. Excellent communication. Very happy. Thank you.