Katana Preset Footswitch v2
A TRS ¼” cable is required to connect the footswitch to the CH1 CH2 foot control socket on the rear on the amp, you can add a Bright Onion TRS cable to the order above, the cables are built using Van Damme cable and Neutrik Rean straight plugs.
The pedal is active so requires power, you can add a battery to the internal clip or use the Boss style 2.1mm 9v (centre negative) DC socket using an adapter (not supplied).
By default, the pedal comes unpainted with a black label, you can have a coloured label for an additional £2.
Examples of our label colours can been seen here. Please note that if a enclosure colour is not listed then it is not available for this pedal.
Please also note that the footswitch will not work correctly while your Katana amp is connected to a computer running the Boss Tone Studio software.
The pedal is built with:
- Aluminium enclosure
- Neutrik jack sockets
- Heavy duty soft touch footswitches
- 2.1mm 9v DC Socket (centre negative) and internal battery holder
- A toggle switch to turn off the battery
- Velcro to stick it to your pedalboard
2 years, please see Terms & Conditions for further information.
- VAT is only applied to UK sales