Katana Preset Footswitch
The footswitch let you switch between the amp presets 1A, 1B, 2A and 2B.
A TRS ¼” cable is required to connect the footswitch to the CH1 CH2 foot control socket on the rear on the amp, you can add a Bright Onion TRS cable to the order above, the cables are built using Van Damme cable and Neutrik Rean straight and right angle plugs.
The pedal is active so requires power, you can add a battery to the internal clip or use the Boss style 2.1mm 9v (negative ground) DC socket using an adapter (not supplied).
By default, the pedal comes unpainted with a black label, you can have the pedal painted for an additional £5-£7 and also have a coloured label for an additional £2.
Examples of our enclosures and labels can been seen here. Please note that if a enclosure colour is not listed then it is not available for this pedal.
Please note that the footswitch will not work correctly while your Katana amp is connected to a computer running the Boss Tone Studio software.
The pedal is built with:
- Aluminium enclosure
- Neutrik jack sockets
- Heavy duty soft touch footswitches
- 2.1mm 9v DC Socket and internal battery holder
- A toggle switch to turn off the battery
- Velcro to stick it to your pedalboard
2 years, please see Terms & Conditions for further information.
- VAT is only applied to UK sales
Absolutely fabulous four button footswitch to easily employ all functionality of the Katanas four preset options. Built like a tank, the internals are exemplary and worth every penny