Need some patch cables for your buffer? Click here!
If you are looking for a buffer to liven up your pedalboard then this may be what you are after.
The buffer is built using the TL072 op-amp which gives great results. If you would like the sockets positions changed get in touch and I'll build it to your spec.
The pedal is active and powered via the Boss style 2.1mm 9v (negative ground) DC socket.
By default, the pedal comes unpainted with a black label, you can have the pedal painted for an additional £5-£7 and also have a coloured label for an additional £2.
Examples of our enclosures and labels can been seen here. Please note that if a enclosure colour is not listed then it is not available for this pedal.
The pedal is built with:
2 years, please see Terms & Conditions for further information.
This is a very sturdy pedal, and defiently helps maintian the highs thought the signal chain when you are using a couple of true bypass pedals in a row, or long cable lengths. The highs are restored nicely, and the signal sounds like it has a whole load more sparkle to it. If you are using a pedal with a good buffer in it early on or throughout your chain (i.e a tuner with a built in buffer) you may not need a buffer and so wont notice much difference, and also I hear fuzzes (especially geranimum fuzzes) can be upset by any buffer, so beware then. But if a buffer is what you need, you really can't go wrong here. Mine is sometimes on the underside of my pedal board (it is elevated), tucked away first in line and basically forgotten about, it just does it's job.
Good bit of kit at a good price