Need some patch cables for your AB switch? Click here!
This is an AB switch with the A or B inputs going to the X output. There is a volume pot for the A input, which comes in handy when you have two guitars that you use on the same amp, but one has a hotter signal than the other.
This pedal lets you lower the level on the louder guitar so both signals will be the same level going to the amp.
The pedal is totally passive. If you need to power the status LEDs the pedal has a Boss style 2.1mm 9v (negative ground) DC socket.
By default the pedal comes unpainted with a clear label, in the options above you can select for the pedal to be powder coat painted black for an additional £5.00. Please note that if you select for the pedal to be painted then it will not be labelled.
The pedal is built with:
- Aluminium enclosure
- Neutrik jack sockets
- 3PDT heavy duty foot switch
- Point to point wiring
- Status LEDs
- 2.1mm 9v DC Socket
- Velcro to stick it to your pedalboard
2 years, please see Terms & Conditions for further information.